Coleman 60QT Tricolour Wheeled Cooler
- 5.60 KGS
- Calculated at Checkout
Coleman Performance Coolers feature better insulation than the average coolbox.
The Advantage of a passive Cooler is the fact they use no energy source. Simply by using ice cubes or ice packs. We recommend Ice Cubes. The Coleman 60QT Tricolour Performance Cooler will keep ice for 4 days so are ideal for picnics or short camping holidays
Developed and used extensively in the hotter climates of South Africa and America, where the high temperatures and humidity stop compressor fridges and Thermoelectric cool-boxes working efficiently.
We recommend using ice cubes and filling the coolbox as full as possible filling up all the cavities between you food and drink. We would advise putting you food in plastic containers and also freezing some cartoons of Milk and juices to help supplement the Ice.
What the manufacturer says:-
This stylish Coleman 60QT Tricolour Performance Cooler is filled with Polyurethane foam insulation which will keep the contents cold on ice for up to four days.
- Holds 95 330ml cans
- Capacity: 56L
- Ice retention: up to 4 days
- Weight: 5.6kg
- Inner dimensions: 49 x 34 x 35cm
- Outer dimensions: 57 x 44 x 45cm
- Easy clean top
- Drain plug to remove ice melt
Additional Premium PU InsulationUnlike other manufacturers, Coleman rigid coolers are insulated with Polyurethane insulation (PU). PU is a very dense and an excellent insulator filling the entire internal cavity of the cooler, leaving no air gaps and so improving its insulating efficiency.Extensive testing at Coleman has shown that cooling loss from rigid coolers is 30% through the top and also 30% through the base. Coleman's latest models feature increased insulation in these particular areas together with reduced insulation on the sides. The result of these changes is not only improved cooling performance but the reduction in exterior dimensions and the increase in internal volume.A New Shape and Increased EfficiencyWhen a cooler comes in contact with a warm floor, heat is transferred directly from the floor to the cooler and reduces the cooler's efficiency. Coleman has included shaped feet into the design of its newer rigid cooler models separating the cooler base from the floor and increasing airflow. This flow of air acts as an additional form of insulation, slowing the transfer of heat from the floor and so improving the coolers performance. Additional research has also resulted in the rounding of the cooler’s corners, once again this change of shape has increased airflow and further enhanced their performance.
When a cooler comes in contact with a hot floor, heat is transferred directly to the cooler. If the cooler is lifted off of the ground, the heat is transferred through the air in the gap (air is a great insulator). Cooler have two integrated, rounded feet providing the perfect amount of space for air to flow.